WJC-T (400mm SHEAVE) SERIES MACHINES
| Capacity | 630kg-1050kg |
| Wrap | Single Wrap |
| Rotor | External Rotor |
| Undercut | U |
| Foot Pad Flatness | <0.5mm |
| Protection Rating | IP41 |
| Insulation Class | F |
| Poles | 40 |
| Duty Cycle | S5-40% |
| Motor Rated Voltage | AC380V |
| Brake | Block |
| Picking/Holding Voltage | DC110V |
Full-wave rectification power source for brakee
| Model |
Capacity kg |
Elevator Speed m/s |
Rated Output KW |
Rated Current A |
Rated Speed rpm |
Frequency Hz |
Sheave Diameter mm |
Torque Nm |
Ropes |
Groove Dist. mm |
Cut Angle | Groove Angle | Roping |
Shaft Load kg |
Handle Wheel | Remote Release |
Inertia kg m^2 |
Weight kg |
| WJC-630-100-T | 630 | 1.0 | 4.2 | 11.0 | 95 | 31.8 | 400 | 419 | 5-Φ8 | 12 | β=90° | γ=30° | 2:1 | 3000 | N | N | 5.15 | 330 |
| WJC-630-150-T | 1.5 | 6.3 | 18.0 | 143 | 47.7 | |||||||||||||
| WJC-630-160-T | 1.6 | 6.7 | 18.0 | 153 | 50.9 | |||||||||||||
| WJC-630-175-T | 1.75 | 7.3 | 18.0 | 167 | 55.7 | |||||||||||||
| WJC-800-100-T | 800 | 1.0 | 5.3 | 12.5 | 95 | 31.8 | 400 | 532 | 6-Φ8 | 12 | β=90° | γ=30° | 2:1 | 3000 | N | N | 5.15 | 335 |
| WJC-800-150-T | 1.5 | 8.0 | 22.0 | 143 | 47.7 | |||||||||||||
| WJC-800-160-T | 1.6 | 8.5 | 22.0 | 153 | 50.9 | |||||||||||||
| WJC-800-175-T | 1.75 | 9.3 | 22.0 | 167 | 55.7 | |||||||||||||
| WJC-1000-100-T | 1000 | 1.0 | 6.4 | 15.0 | 95 | 31.8 | 400 | 640 | 6-Φ8 | 12 | β=90° | γ=30° | 2:1 | 3000 | N | N | 5.15 | 335 |
| WJC-1000-150-T | 1.5 | 10.0 | 29.0 | 143 | 47.7 | 665 | ||||||||||||
| WJC-1000-160-T | 1.6 | 10.7 | 29.0 | 153 | 50.9 | |||||||||||||
| WJC-1000-175-T | 1.75 | 11.6 | 29.0 | 167 | 55.7 | |||||||||||||
| WJC-1050-100-T | 1050 | 1.0 | 6.4 | 15.0 | 95 | 31.8 | 400 | 640 | 6-Φ8 | 12 | β=90° | γ=30° | 2:1 | 3000 | N | N | 5.15 | 335 |
| WJC-1050-150-T | 1.5 | 10.3 | 30.0 | 143 | 47.7 | 686 | ||||||||||||
| WJC-1050-160-T | 1.6 | 11.0 | 30.0 | 153 | 50.9 | |||||||||||||
| WJC-1050-175-T | 1.75 | 12.0 | 30.0 | 167 | 55.7 |
Notes:
1.The brake picking/holding voltage is DC110V. Voltage switch is not necessary.
2.The balance ratio is 0.45~0.5.
3.180° wrap angle and MRL application.
4.Regen drive application, please consult with us, then order with notes.
Hot Tags: WJC-T(400MM) MRL Passenger Elevator, China, Manufacturer, Supplier, Factory, Quality, Customized, Advanced
